TJ Nuclear Power Plant

This program simulates the operation of a nuclear power reactor. The object is to operate the plant at a maximum average power output without causing a reactor meltdown. The control rods adjust the amount of heat produced by the reactor. Primary coolant transfers this heat to the heat exchanger. Secondary coolant transfers heat from the heat exchanger to the turbine, where power is produced, and finally to the cooling tower.

The emergency coolant is used to help shut down the reactor when the other systems fail. Unlike the other coolants,

emergency coolant is not recycled. Use the controls to set your control rod settings and flow rates. The reactor can be operated until a meltdown occurs or the reactor fuel is exhausted. When the fuel is exhausted your performance will be evaluated.